Flanged Ball Valve termasuk 1PC Stainless Steel Flange Ball Valve, 1PC Carbon Steel Flanged Ball Valve, 1PC API/DIN
Flanged Ball Valve, 2PC API Flanged Stainless Steel Ball Valve, Dua Bagian DIN F4/F5 Flanged Ball Valve, 2 Piece JIS 10K
Full Port Flanged Ball Valve, 2PC Floating Flanged Ball Valve dengan ISO5211 Direct Mounting Pad, 2PC CF8M/WCB Flanged
Ball Valve, 3PC API/DIN standar Flanged Ball Valve, 3PC Stainless Steel Floating Ball Valve, Tiga Bagian CF8M
150LB Flanged Ball Valve, 3 Piece Full Port PN16/40 Flanged Ball Valve
2 pieces ball valve flange end direct mounting pad
The high-platform 2 pieces ball valve and the flange gate valve belong to the same type of valve, the difference is in its closing part is a ball, the ball around the valve body center line for rotation to achieve opening, closing a valve. Ball valve in the pipeline is mainly used to cut, distribute and change the flow direction of the medium. Two-piece ball valve, three-piece ball valve, is widely used a new type of valve.
Points for attention:
1. keep the valve handle rotating position.
2. can not be used as throttling.
3. Ball valve with transmission mechanism shall be installed upright.
Advantages:
1. the fluid resistance is small, its resistance coefficient is equal to the pipe section of the same length.
2. structure is simple, small size and light weight.
3. Close and reliable the ball valve sealing surface materials are widely used plastic, good sealing, in the vacuum system has been widely used.
4. operation is convenient, open and close quickly, from full open to full close as long as rotating 90°, easy to remote control.
5. maintenance is convenient, ball valve structure is simple, sealing ring is generally active, disassembly and replacement are more convenient.
6. when fully open or closed, the sealing surface of the ball and seat is isolated from the medium, and when the medium passes, it will not cause erosion of the valve sealing surface.
7. wide range of application, diameter from small to a few millimetres, large to a few meters, from high vacuum to high pressure can be applied. When the ball rotates 90 degrees, it should all present the sphere at the inlet and outlet, thus truncating the flow.
High platform ball valve is a new type of ball valve , it has its own unique structure of some advantages, such as switch without friction, sealing is not easy to wear, opening and closing torque is small. This reduces the specification of the actuator. With multi-turn electric actuator, the medium can be adjusted and cut off tightly. Widely used in petroleum, chemical industry, urban water supply and drainage and other strict cut off conditions.
Material List (5-6) | ||||
No. | PARTS | MATERIAL | ||
1 | BODY | WCB | CF8 | CF8M |
2 | SEAT | PTFE | ||
3 | BALL | CF8 | CF8 | CF8M |
4 | O-RING | FPM | ||
5 | GASKET | PTFE | ||
6 | BONNET | WCB | CF8 | CF8M |
7 | BOLT | 304 | ||
8 | NUT | 304 | ||
9 | STEM | 304 | 304 | 316 |
10 | STEM WASHER | PTFE+25% GF | ||
11 | O-RING | FPM | ||
12 | PACKING | PTFE | ||
13 | WEAR WASHER | PTFE+25% GF | ||
14 | GLAND | 304 | ||
15 | DISC SPRING | 304 | ||
16 | GLAND FLANGE | CF8 | ||
17 | STOPPER | 304 | ||
18 | TEE | WCB/CF8 | ||
19 | HANDLE | Q235A | ||
20 | HEX SOCKET SET SCREW | 304 | ||
21 | BOLT | 304 | ||
22 | NUT | 304 |
Material List (8-12) | ||||
No. | PARTS | MATERIAL | ||
1 | BODY | WCB | CF8 | CF8M |
2 | GASKET | PTFE | ||
3 | BALL | CF8 | CF8 | CF8M |
4 | SEAT | PTFE | ||
5 | BONNET | WCB | CF8 | CF8M |
6 | STEM | 304 | 304 | 316 |
7 | STEM WASHER | PTFE+25% GF | ||
8 | BOLT | 304 | ||
9 | SPRING WASHER | 304 | ||
10 | NUT | 304 | ||
11 | O-RING | FPM | ||
12 | PACKING | PTFE | ||
13 | WEAR WASHER | PTFE+25% GF | ||
14 | GLAND | 304 | ||
15 | DISC SPRING | 304 | ||
16 | GLAND FLANGE | CF8 | ||
17 | WORMGEAR ACTUATOR | / | ||
18 | BOLT | 304 | ||
19 | SPRING WASHER | 304 | ||
20 | NUT | 304 | ||
21 | POSITIONING GASKET | PTFE | ||
22 | PACKING | PTFE | ||
23 | POSITIONING SHAFT | 304 | 304 | 316 |
24 | NUT GLAND | WCB | CF8 | CF8M |
25 | NUT | 304 | ||
26 | HEX SOCKET BOLT | 304 | ||
27 | BOLT | 304 | ||
28 | NUT | 304 |
Dimensions GB PN16 | ||||||||||||||||||
Nominal Diameter | L | d | D2 | D1 | D | b | f | n-φd1 | H | h | H1 | W | Ra | Rb | A | B | KxK | |
125 | 5" | 320 | 125 | 188 | 210 | 250 | 22 | 2 | 8-18 | 170 | 25 | 255 | 650 | 5.5 | 6.5 | 102 | 125 | 22X22 |
150 | 6" | 360 | 150 | 212 | 240 | 285 | 22 | 2 | 8-22 | 192 | 30 | 277 | 800 | 5.5 | 6.5 | 102 | 125 | 27X27 |
200 | 8" | 400 | 200 | 288 | 295 | 340 | 24 | 2 | 12-22 | 234 | 35 | 280 | 300 | 5.5 | 6.5 | 102 | 125 | 27X27 |
250 | 10 | [1m2 buah ball valve flange end direct mounting pad | Katup bola 2 buah platform tinggi dan katup gerbang flensa milik jenis katup yang sama, perbedaannya adalah pada bagian penutupnya adalah bola, bola di sekitar garis tengah badan katup untuk rotasi untuk mencapai pembukaan, penutupan katup. Katup bola dalam pipa terutama digunakan untuk memotong, mendistribusikan, dan mengubah arah aliran media. Katup bola dua bagian, katup bola tiga bagian, banyak digunakan jenis katup baru. | Poin untuk perhatian: | 1. menjaga posisi pegangan katup berputar. | 26 | 2 | 2. tidak dapat digunakan sebagai throttling. | 3. Katup bola dengan mekanisme transmisi harus dipasang tegak. | 45 | Keuntungan: | 1. hambatan fluida kecil, koefisien hambatannya sama dengan bagian pipa dengan panjang yang sama. | 2. struktur sederhana, ukuran kecil dan ringan. | 3. Tutup dan andal bahan permukaan penyegelan katup bola banyak digunakan plastik, penyegelan yang baik, dalam sistem vakum telah banyak digunakan. | 4. operasi nyaman, buka dan tutup dengan cepat, dari buka penuh hingga tutup penuh selama berputar 90 °, mudah dikendalikan dari jarak jauh. | 5. perawatan nyaman, struktur katup bola sederhana, cincin penyegel umumnya aktif, pembongkaran dan penggantian lebih nyaman. | 6. ketika sepenuhnya terbuka atau tertutup, permukaan penyegelan bola dan kursi diisolasi dari media, dan ketika media lewat, itu tidak akan menyebabkan erosi pada permukaan penyegelan katup. | |
7. berbagai aplikasi, diameter dari kecil hingga beberapa milimeter, besar hingga beberapa meter, dari vakum tinggi hingga tekanan tinggi dapat diterapkan. Ketika bola berputar 90 derajat, itu semua harus menampilkan bola di saluran masuk dan keluar, sehingga memotong aliran. | Katup bola platform tinggi adalah jenis baru dari | bola va | , ia memiliki struktur unik dari beberapa keunggulan, seperti sakelar tanpa gesekan, penyegelan tidak mudah aus, torsi pembukaan dan penutupan kecil. Ini mengurangi spesifikasi aktuator. Dengan aktuator listrik multi-putaran, media dapat disesuaikan dan dipotong dengan rapat. Banyak digunakan dalam minyak bumi, industri kimia, pasokan air perkotaan dan drainase dan kondisi pemotongan ketat lainnya. | Daftar Materi (5-6) | Tidak. | BAGIAN | 28 | 2 | BAHAN | TUBUH | 45 | WCB | CF8 | CF8M | KURSI | PTFE | BOLA | CF8 |
CF8
CF8M | ||||||||||||||||||
O-RING FPM | L | d | D2 | D1 | D | b | f | PAKING | H | h | H1 | W | Ra | Rb | A | B | PTFE | |
KAP MESIN | 5" | WCB | CF8 | CF8M | BAUT | 304 | KACANG | 2 | 304 | TANGKAI | 25 | 304 | 304 | 316 | PENCUCI BATANG | PTFE + 25% GF | O-RING | FPM |
SEDANG MENGEMAS | 6" | PTFE | PAKAI PENCUCI | PTFE+25% GF | KELENJAR | 304 | DISK SPRING | 2 | 304 | FLANGE KELENJAR | 30 | CF8 | SUMBAT | 304 | TEE | WCB/CF8 | MENANGANI | Q235A |
SEKRUP SOCKET HEX | 8" | 304 | BAUT | 304 | KACANG | 304 | 27 | 2 | Daftar Materi (8-12) | Tidak. | 35 | BAGIAN | BAHAN | TUBUH | WCB | CF8 | CF8M | PAKING |
PTFE | BOLA | CF8 | CF8 | CF8M | KURSI | PTFE | KAP MESIN | 2 | WCB | CF8 | 45 | CF8M | TANGKAI | 304 | 304 | 316 | PENCUCI BATANG | PTFE + 25% GF |
BAUT | 304 | MUSIM SEMI MESIN CUCI | 304 | KACANG | 304 | O-RING | FPM | 2 | SEDANG MENGEMAS | PTFE | 45 | PAKAI PENCUCI | PTFE+25% GF | KELENJAR | 304 | DISK SPRING | 304 | FLANGE KELENJAR |
CF8
AKTUator WORMGEAR | ||||||||||||||||||
BAUT 304 | L | d | D2 | D1 | D | b | f | MUSIM SEMI MESIN CUCI | H | h | H1 | W | Ra | Rb | A | B | 304 | |
KACANG | 5" | 304 | POSISI GASKET | PTFE | SEDANG MENGEMAS | PTFE | 22 | 3 | POROS POSISI | 304 | 25 | 304 | 316 | KELENJAR KACANG | WCB | CF8 | CF8M | KACANG |
304 | 6" | SOCKET HEX BOLT | 304 | BAUT | 304 | KACANG | 22 | 3 | 304 | Satuan: mm | 30 | Dimensi GB PN16 | Nominal | Diameter | KxK | 125 | 320 | 125 |
188 | 8" | 210 | 250 | 8-18 | 170 | 255 | 24 | 3 | 650 | 5.5 | 35 | 6.5 | 102 | 125 | 22X22 | 150 | 360 | 150 |
212 | 240 | 285 | 8-22 | 192 | 277 | 800 | 26 | 3 | 5.5 | 6.5 | 45 | 102 | 125 | 27X27 | 200 | 400 | 200 | 288 |
295 | 340 | 12-22 | 234 | 280 | 300 | 5.5 | 28 | 3 | 6.5 | 102 | 45 | 125 | 27X27 | 250 | 10[22m | |394| | |395| |
|396|
|397| | ||||||||||||||||||
|398| |399| | L | d | D2 | D1 | D | b | f | |400| | H | h | H1 | W | Ra | Rb | A | B | |401| | |
|402| | 5" | |403| | |404| | |405| | |406| | |407| | 20 | 2 | |408| | |409| | 25 | |410| | |411| | |412| | |413| | |414| | |415| | |416| |
|417| | 6" | |418| | |419| | |420| | |421| | |422| | 22 | 2 | |423| | |424| | 30 | |425| | |426| | |427| | |428| | |429| | |430| | |431| |
|432| | 8" | |433| | |434| | |435| | |436| | |437| | 22 | 2 | |438| | |439| | 35 | |440| | |441| | |442| | |443| | |444| | |445| | |446| |
|447| | |448| | |449| | |450| | |451| | |452| | |453| | 24 | 2 | |454| | |455| | 45 | |456| | |457| | |458| | |459| | |460| | |461| | |462| |
|463| | |464| | |465| | |466| | |467| | |468| | |469| | 24 | 3 | |470| | |471| | 45 | |472| | |473| | |474| | |475| | |476| | |477| | |478| |
|479|
|480||481||482||483||484|
|485||486|