Sales

HT19V-I adalah Driver LED 2-in-1 Bebas Flicker 220-240VAC 18W & Sensor Gelombang Mikro Solusi Terisolasi 2-in-1 dengan Tegangan Output 24-52V dan Tinggi Pemasangan 6m(H) x 14m(D) dan Rentang Deteksi

Rincian produk

Empty Load 63V LED Driver & Sensor 2-in-1 Max. 18W Microwave Motion Detector 6mHx14mD

HT19V-I is a Flicker-Free 220-240VAC 18W LED Driver&Microwave Sensor 2-in-1 Isolated Solution with 24-52V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range

Features:

1. Flicker-free Isolated Solution;

2. Output Power 18W max. with Voltage of 24-52V

3. Optional Output current of 0.3A/0.35A for different projects.

4. Max. mounting height x detection range: 6M x 14M.

5. Empty Load voltage of 63V max.

6. Optional detection area, hold time, stand-by dimming level, stand-by period and daylight threshold.

7. Efficiency of 85%

8. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP

Product Description

Input voltage	220~240VAC 50/60Hz
Input current	0.07A Max
Input power	22W Max
Detection area	50%/100%
Hold time	5s/60s/ 5min/10min
Daylight threshold	2Lux /10Lux /50Lux/Disable
Stand-by period	0s/10s/10min /+∞
Stand-by dimming level	10%/30%
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
Detection angle	30°-150°
Mounting height	Max.6m
Detection range	Max.ø14m
Output LED current	0.3A/0.35A±5%
Output LED voltage	24-52V
Output LED power	18W Max.
Empty load voltage	≤63V
Power factor	＞0.9
Efficiency	80% (Max.)
Operating temperature	Ta: -20°C+50°C Tc: 80°C
Abnormal protection	SCP:Auto recovery,OVP,OCP,OTP
EMC standard	EN55015
Safety standard	EN61347-1 EN61347-2-13 EN60598-1
IP rating	IP20
Life time	30,000 hours
Warranty	3 years

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m.

Mechanical structure

With eight DIP switch poles to set all parameters

With two DIP switch poles to choose different output current

With two installation hole, easily fixed to the lighting fixture for end user.

Wiring diagram

Two poles to connect with power supply (220-240VAC)

Two poles to connect with LED Light

Dimensions (mm)

DIP Switch Setting

Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level

In this area, The period of Definition of the The period of light The definition of movement will light keeping ambient brightness; keeping low output low output in the be detected 100% brightness only when the before it's standby period. and able to after moving ambient brightness completely trigger the objects leave the is lower than the switched off. When sensor. 100% detection area. preset specific lux it's preset as∞“,detection

[1mBeban Kosong Driver & Sensor LED 63V 2-in-1 Maks. Detektor Gerakan Microwave 18W 6mHx14mD

HT19V-I adalah Driver LED 220-240VAC 18W Bebas Flicker & Sensor Gelombang Mikro Solusi Terisolasi 2-in-1 dengan Tegangan Output 24-52V dan Tinggi Pemasangan 6m(H) x 14m(D) dan Rentang Deteksi

Fitur:

1. Solusi Terisolasi Bebas Flicker;
2. Daya Keluaran 18W maks. dengan Tegangan 24-52V
Arus keluaran opsional 0.3A/0.35A untuk proyek yang berbeda.
4. Maks. tinggi pemasangan x rentang deteksi: 6M x 14M.