SPECIFICAION MODEL SMT-012-060VW SMT-024-060VW SMT-036-060VW OUTPUT DC VOLTAGE 12V 24V 36V RATED CURRENT 5.0A 2.5A 1.66A CURRENT RANGE 0~5.0A 0~2.5A 0~1.66A RATED POWER 60W 60W 60W RIPPLE&NOISE(max) 1.2V 1.2V 1.2V voltage TOLERANCE 12V±5% 24V±5% 36V±5% SETUP RISE TIME 80ms/110,220VAC 80ms/110,220VAC 80ms/110,220VAC HOLD UP TIME(Typ.) 60ms/110,220VAC 60ms/110,220VAC 60ms/110,220VAC INPUT VOLTAGE RANGE 90~135/170~265Vac 90~135/170~265Vac 90~135/170~265Vac FREQUENCY RANGE 50~60Hz 50~60Hz 50~60Hz POWER FACTOR(Typ.) EFFICIENCY(Typ.) ﹥84% ﹥84% ﹥84% AC CURRENT(Typ.) 0.5A/110V,220VAC 0.5A/110V,220VAC 0.5A/110V,220VAC INRUSH CURRENT (Typ.) COLD START 30A/110,220VAC PROTECTION Short circuit Protection type:recovers automatically after condition is removed Overload overload protected@145-160% above peak rating Over temperature Protection type:Shut down o/p voltage,re-power on to removed ENVIRONMENT WORKING TEMP. -30~+50℃ (Refer to output load derating curve) WORKING HUMIDITY 20~99% RH non-condensing(Waterproof) STORAGE TEMP.,HUMIDITY -40~+80℃,10~99%RH SAFETY&EMC SAFETY STANDARDS UL, CE Mark(LVD),IP67 WITHSTAND VOLTAGE I/P-O/P:1.5KVAC IP-GND:1.5KVAC EMC Test Standards EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 NOTE 1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 [1mNama Produk: AC ke DC
V 60W
1.66A
1.2V
12V ± 5%
SETUP WAKTU BANGKIT
80ms/110,220VAC
90~135/170~265Vac
90~135/170~265Vac
RENTANG FREKUENSI